Flag

Solufeed Superior Fleury v.2

An acidifying, finishing feed which helps overcome the difficulties associated with high pH water with high bicarbonate levels. Buy Online

Superior water soluble NPK fertilizers ONLY available from Solufeed.  Suitable for hard and soft water.

Uses

Solufeed Superior Fleury v.2 fertilizer is used in the same way as other soluble fertilizers. The normal method is to make up a 10% stock solution (1 kg of Solufeed Superior Fleury v.2 dissolved in 10 litres of water) which is further diluted 1:100 giving a final dilution of 1 gram of Solufeed Superior Fleury v.2 per litre of irrigation water. Hard water usually contains high levels of calcium and/or magnesium ions together with bicarbonate (HCO3) ions; the pH is usually high.

For Hard Water Areas

The calcium in hard water is beneficial for growing plants but the associated alkalinity means that most plants do not respond well to fertilizer and can be prone to trace element deficiencies. Some commercial growers invest in equipment to treat hard water with concentrated mineral acids that will reduce the bicarbonates and reduce pH to improve growing performance.

Using acidic Solufeed Superior Fleury v.2 fertilizer will neutralize some of the bicarbonates in the water and will reduce pH thereby improving conditions for plant growth.

For Soft Water Areas

Soft water is unlikely to be alkaline and normally contains low levels of bicarbonates (HCO3). Do not use acidic Vigil v.2 or Fleury v.2 in water with bicarbonate levels of less than 150 ppm because the fertilizer may over-acidify the water.

Pekacid is a registered trademark of ICL Fertilizers

Glasshouse

Benefits

  • Mostly nitrate nitrogen for immediate availability.
  • Zero ureic nitrogen - suitable for all crops and growing media.
  • Acidic formulation:
    • Will reduce water pH for growers with hard water.
  • Rapidly and completely soluble.
  • Fully chelated balanced mix of trace elements.
  • Suitable for a wide range of crops from pot plants to soft fruit.
  • Made exclusively by Solufeed using the unique Pekacid™ raw material.
  • Low hazard in use, handling and storage.

Composition

 

 

% (w/w)

ppm 10% solution diluted 1:100

Total nitrogen (N)

13.0

130

Nitrate  (NO3) nitrogen

8.8

88

Ammoniacal (NH4)

4.2

42

Phosphorus as P2O5 (P)

10.0 (4.36)

100

Potassium as K2O (K)

28.0 (23.15)

280

Magnesium as MgO (Mg)

1.9 (1.15)

19

Boron (B)

0.025

0.25

Copper (Cu) chelated by EDTA

0.01

0.1

Iron (Fe) chelated by EDTA

0.18

1.8

Manganese (Mn) chelated by EDTA

0.06

0.6

Molybdenum (Mo)

0.005

0.05

Zinc (Zn) chelated by EDTA

0.08

0.8

pH 1% solution

2.94

 

EC @ 1 g/l (mS/cm)

1.49

 

Pack Size

20 kg bag, 50 per pallet

Buy Online